RF fractional co2 laser machine, face-lifts, RF Tube

  • Model No.: Dana RFS2
  • Item No:     60100810
  • VLR (  FemiLift  ) Included
  • Min order: 1 unit
  • Accept Min order: Yes
  • Supply Ability: 100 unit / Month
  • Country of Origin:  China ShenZhen
  • Stock Time:within 10  working days
SKU: 60100810 Categories: ,


What is the Theory of the co2 fractional laser with RF Tube

Fractional laser light penetrates the skin with tiny thermal channels through the

random scanning, creating an ablative and thermal effect-on only channels (a micro-injury) without damaging the surrounding tissue. The tissue surrounding the micro-injury sites (about 15-20% of the treatment area) starts the process of healing. As collagen remodels, skin tightened, scars improved and pigmented lesions removed.

What is the application the co2 fractional laser?

1,Application Range of Fractional treatment hand piece

a,Large pores, Fine lines, Skin tightening and whitening, Skin loosen(Deep Wrinkles), Stretch marks.
b,Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid;
c,Reconstruction of photo aging skin.
2,Application Range of Incision Hand piece
a,Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery
b,In cosmetic surgery, it can be adapted to incisions for Blephaplasty, Skin Tags and Ingrow Nails, Compound Nevus and Infra Dermal Nevus etc
3, Vaginal Tightening for women

What is the advantages of the co2 fractional laser ?

1. Three modes of laser energy output are selective: Ultra Pulse, CW and Fractional modes

2. Adopt COHERENT RF-excited laser system enables the output quality more stable, more uniform, more

consistent, (compared to ordinary CO2 laser installed with glass tubes)
3. Healing zone volume is adjustable, namely the volume of spots is adjustable in a

certain healing zone. Therapists could adjust the spot density upon skin type, lesion

parts and effectiveness requirement of different patients
4. Various spot volumes are suitable for different area of the body which maximally

avoid the side-effect that result from the overlap of the spot, reduce the pain during the treatment, satisfy different therapists’ unique request.

5. 12.1″TFT touch LCD, rotated 360° gives you a luxury enjoyment;
6. Reserved entry access for laser room ensures a safe treatment
7. Comparing with existing traditional CO2 Sealed Glass Laser, RF excited CO2 lasts

8. FemiLift  Included.


Specification of the co2 fractional laser

Laser mode Fractional Co2 laser – RF Tube
Wavelength 10600nm, far-infrared laser
Pulse Power 30w
Pulse Radio frequency 0.530W
Control Touching switch, microprocessor-controlled
Screen 8.4inch color touch screen
Working mode: 4 modes Continuous; Single pulse; Repeat pulse; Super pulse.
Scan Graphics: 7 graphics Square, rectangle, round, triangle, oval, diamond, line orcustomized
Dot quantity 400 dots at most
Working state Hyper-pulsed mode
Scan modes: 3 modes Sequence scan or Random scan or maximum distance scan
Pulse energy 10mj to 200mj is optional for each dot.
Laser apparatus Sealed off laser device stimulated by direct current
Condenser focus f=100mm
Beam divergence angle 0.3 mrad
Spot size Min 0.1mm at the focus
Radiation time 0.1~1 ms
Interval time 0.1~1 ms
Aiming beam Less than 2mW, 635nm red semiconductor laser
Cooling system Closed loop circulating water
Environment temperature 5-400°C
Relative humidity <80%
Temperature in transit -40-500°C
Humidity in transit <85%
Beam transport device Articulated arm with 7-joint and balance weight
Atomospheric pressure 86.0kkpa-106.0kpa
Warning up time 5 min
N. weight (kg) 40kg
Power supply 220V/110V 50Hz/60Hz

You may also like…